Loading products and specifications…
Industrial RoutersDesign the WAN connection
The Cisco IR1101-K9 is a modular industrial router with four Fast Ethernet LAN ports, a Gigabit Ethernet RJ45/SFP combo WAN interface and an isolated RS-232 serial interface. The IP30 base chassis accepts 9.6–60 V DC and supports panel, wall or DIN-rail installation. Cellular and expansion capabilities depend on the installed modules.
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestCisco / PRODUCT DETAILS
Treat interfaces, forwarding requirements and software entitlements as separate parts of the routing design.
Tell us which system or service this product is for. We do not have details for this section yet.
Identify each WAN handoff, line card and transceiver.
View all specifications →Cisco / ORDER & INSTALLATION DETAILS
Use the complete Cisco PID, including any bundle suffix.
Match the host platform and supported software release.
Identify separately ordered interfaces, optics, software and support.
Technical overview
Use the full part number when comparing options or asking about system fit.
| Manufacturer | Cisco |
|---|---|
| Manufacturer part number | IR1101-K9 |
| Ingress protection | IP30 |
| Chassis dimensions (H x W x D) | 60 x 132.5 x 124.9 mm |
| Chassis weight | 1.02 kg |
| Mounting options | Panel, wall or DIN rail; vertical or horizontal |
| DC input range | 9.6–60 V DC |
| Base chassis power consumption | 6.6 W idle; 9.8 W typical; 12 W maximum |
| Console interface | Mini Type-B USB |
| Base Ethernet WAN | 1 x 10/100/1000 combo port, RJ45/SFP |
| Base Ethernet LAN | 4 x 10/100BASE-T Fast Ethernet ports |
| Serial interface | Isolated RS-232 RJ45 DTE; asynchronous up to 115200 baud |
| Operating temperature by airflow | -40 to 60 °C sealed/no airflow; -40 to 70 °C at 40 LFM; -40 to 75 °C at 200 LFM |
HOW THIS PRODUCT FITS YOUR NETWORK
Choose how you plan to use this product.
Identify each WAN handoff, line card and transceiver.
IR1101-K9: check wan interfaces and traffic requirements.
This sketch helps describe your request. We will confirm protocols, port counts, coverage and failover when quoting.
YOUR QUOTE REQUEST
Add the quantity, options and installation details you want us to quote.
Specify the exact Cisco PID, software release and any required feature or throughput entitlement. Hardware and licenses are separate unless the quoted bundle states otherwise.
No license options are listed for this part number. If you need software, add its manufacturer part number and we will check it with the hardware.
SUPPORT & REPLACEMENT
Check support dates, replacement options and whether continued use still makes sense.
We do not have confirmed sales and support dates for this part number.
Send us the full IR1101-K9 order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusProducts with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.USING HARDWARE RESPONSIBLY
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
Use measured average input power for the same workload. PSU ratings and processor TDP are different from total system power.
Energy difference = (current W − proposed W) × hours × units ÷ 1,000. Excludes cooling, embodied emissions and purchase costs.CONNECTION DETAILS
Check the protocol and port requirements of the equipment you intend to connect. Ethernet, Fibre Channel, InfiniBand and carrier interfaces are not interchangeable.
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
The Cisco IR1101-K9 is a modular industrial router with four Fast Ethernet LAN ports, a Gigabit Ethernet RJ45/SFP combo WAN interface and an isolated RS-232 serial interface. The IP30 base chassis accepts 9.6–60 V DC and supports panel, wall or DIN-rail installation. Cellular and expansion capabilities depend on the installed modules.
Specify the WAN handoff, routing features, interfaces, power feed and redundancy requirements. Confirm all line cards, optics and software entitlements in the requested configuration.
Confirm installed modules and software entitlements.
Temperature limits depend on enclosure airflow; base power figures exclude expansion modules.
Before you request a quote
Include the full model, manufacturer P/N, revision and quantity.
Tell us the host model, generation, installed configuration and required supporting hardware.
Specify condition, testing requirements, destination and requested delivery date.
Industrial Routers
P/NIR809G-LTE-VZ-K9
Industrial Routers
P/NIR829B-2LTE-EA-RK9
Industrial Routers
P/NIR829M-2LTE-EA-RK9
Industrial Routers
P/NIR829B-LTE-EA-RK9
