Loading products and specifications…
Plan coverage and client capacity
D-Link DAP-2662 is a wireless AC1200 Wave 2 Dual-Band PoE Access Point. Wireless data rates: 300 Mbps 2.4 GHz; 867 Mbps 5 GHz. Antenna gain: 3 dBi for 2.4 GHz; 4 dBi for 5 GHz. Wired connection: 1 x Gigabit Ethernet LAN.
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestD-Link / PRODUCT DETAILS
Coverage is a site design question. Radio specifications alone do not determine usable range or client capacity.
Tell us which system or service this product is for. We do not have details for this section yet.
Tell us which system or service this product is for. We do not have details for this section yet.
Describe client density, application load and the intended coverage area.
View all specifications →D-Link / ORDER & INSTALLATION DETAILS
Use the exact D-Link model and hardware revision.
Confirm interface layout, PoE requirements and management mode.
Match the regional power supply and mounting accessories.
Technical overview
Use the full part number when comparing options or asking about system fit.
| Manufacturer | D-Link |
|---|---|
| Manufacturer part number | DAP-2662 |
| Wireless speed | 300 Mbps 2.4 GHz; 867 Mbps 5 GHz |
| Antenna type | Embedded omni-directional antennas |
| Antenna gain | 3 dBi for 2.4 GHz; 4 dBi for 5 GHz |
| Wired interface | 1 x Gigabit Ethernet LAN |
| Auto channel selection | Yes |
| Power-over-Ethernet | Yes |
| Advanced features | WiFi4EU; MU-MIMO; SmartBeam; 802.11k/r Roaming |
| Frequency band mode | Dual-band simultaneous |
| Type of housing | Plastic |
| Wireless modes | Access Point (AP); WDS bridge; WDS with AP; Wireless client |
| Maximum number of SSIDs | 16 |
| WMM-PS/802.11e (U-APSD) | Yes |
| Wi-Fi scheduler | Yes |
| AP traffic load balance | Yes |
| L2 roaming | Yes |
| WEP 64/128 bit | Yes |
| WPA/WPA2-Personal/Enterprise | Yes |
| TKIP/AES encryption | Yes |
| WLAN partition | Yes |
| SSID broadcast disable | Yes |
| Station isolation | Yes |
| MAC address filtering | Yes |
| 802.1X authentication | Yes |
| DHCP server | Yes |
| IGMP snooping | Yes |
| ARP spoofing | Yes |
| IPv6 | Yes |
| WEB | Yes |
| CLI | Yes |
| Telnet | Yes |
| SSH | Yes |
| Syslog | Yes |
| WPA_WPA2_PSK over WDS | Yes |
| NTP | Yes |
HOW THIS PRODUCT FITS YOUR NETWORK
Choose how you plan to use this product.
Describe client density, application load and the intended coverage area.
DAP-2662: check radio capabilities and regulatory domain.
This sketch helps describe your request. We will confirm protocols, port counts, coverage and failover when quoting.
YOUR QUOTE REQUEST
Add the quantity, options and installation details you want us to quote.
Include the full D-Link model or part number, required revision and host configuration. List software and service requirements separately.
No license options are listed for this part number. If you need software, add its manufacturer part number and we will check it with the hardware.
SUPPORT & REPLACEMENT
Check support dates, replacement options and whether continued use still makes sense.
We do not have confirmed sales and support dates for this part number.
Send us the full DAP-2662 order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusProducts with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.USING HARDWARE RESPONSIBLY
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
Use measured average input power for the same workload. PSU ratings and processor TDP are different from total system power.
Energy difference = (current W − proposed W) × hours × units ÷ 1,000. Excludes cooling, embodied emissions and purchase costs.CONNECTION DETAILS
Select the regional radio version, antennas and mounting hardware for the site. Verify the supported controller or management service, software release and power supply for this access point.
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
D-Link DAP-2662 is a wireless AC1200 Wave 2 Dual-Band PoE Access Point. Wireless data rates: 300 Mbps 2.4 GHz; 867 Mbps 5 GHz. Antenna gain: 3 dBi for 2.4 GHz; 4 dBi for 5 GHz. Wired connection: 1 x Gigabit Ethernet LAN.
Check the installation country, frequency bands, mounting position and power source. Published radio rates describe the wireless link, rather than guaranteed application throughput. Tell us whether you need an access point alone or the mounting and power accessories as well.
Before you request a quote
Include the full model, manufacturer P/N, revision and quantity.
Tell us the host model, generation, installed configuration and required supporting hardware.
Specify condition, testing requirements, destination and requested delivery date.
Wireless Access Point
P/NDAP-2020
Wireless Access Point
P/NDAP-2610
Wireless Access Point
P/NDAP-2680
Wireless Access Point
P/NDAP-2682
