Loading products and specifications…
Enterprise ServerBuild around your workload
Supermicro SYS-1019S-MC0T enterprise server, manufacturer order code SYS-1019S-MC0T. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestSupermicro / PRODUCT DETAILS
See what is installed, then compare it with the platform limits. The maximum supported configuration may be different from what ships with this unit.
KEY SPECIFICATIONS / 01
Confirm drive carriers, backplane, controller and any required cables.
Supermicro / ORDER & INSTALLATION DETAILS
Identify the complete system SKU and board revision.
Check the supported chassis, backplane and riser combination.
Include required cables, cooling parts and drive carriers in the order.
Technical overview
Use the full part number when comparing options or asking about system fit.
| Manufacturer model | SYS-1019S-MC0T |
|---|---|
| Ordering P/N | SYS-1019S-MC0T |
| Product type | Manufacturer system order code; listed processor, memory, storage, expansion, networking, cooling and power details describe platform capabilities or limits unless the source explicitly states installed components |
| Manufacturer category | Server System |
| CPU | Single Socket H4 (LGA 1151) supports: Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen Core™ i3, Intel® Pentium®, Intel® Celeron® processors CPU TDP up to 80W |
| Note | BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors |
| Memory Capacity | 4x 288-pin DDR4 DIMM slots Up to 64GB DDR4 ECC UDIMM |
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
| DIMM Sizes | 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| Chipset | Intel® C236 chipset |
| On-Board Devices — SATA | SATA3 (6 Gbps) via C236 controller RAID 0, 1, 5, 10 |
| On-Board Devices — SAS | Broadcom 3008 SAS3 (12Gbps) controller; SW RAID 0, 1, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Dual Intel® X550 10GBase-T LAN ports Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| On-Board Devices — Video | ASPEED AST2400 BMC |
| Input / Output — SATA | 8 SATA3 (6Gbps) ports |
| Input / Output — SAS | 8 SAS3 (12Gbps) ports |
| LAN | 2 RJ45 10GBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) 6 USB 2.0 ports (2 rear + 4 headers) |
| Input / Output — Video | 1 VGA port |
| Serial Port / Header | 2 COM ports (1 rear, 1 header) |
| SuperDOM | 2 SuperDOM (Disk on Module) ports with built-in power |
| Voltage | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
| FAN | Total of 6 fan headers supporting up to 6 fans 4 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support I 2 C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | System Information LED Suspend static indicator LED UID/Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free |
| Form Factor | 1U Rackmount |
| Model | CSE-113MFAC2-341CB |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 19.98" (507mm) |
| Package | 8.5" (H) x 24" (W) x 29.5" (D) |
| Weight | Gross Weight: 31 lbs (14.1 kg) Net Weight: 18.5 lbs (8.4 kg) |
| Available Colors | Black |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2 Network activity LEDs System Information LED |
| PCI-E | 1 PCI-E 3.0 x8 |
| M.2 | 1x M.2 Interface: SATA and PCI-E 3.0 x4 Form Factor: 2260 Key: M-Key Double Height Connector |
| Hot-swap | 8 Hot-swap 2.5" SAS/SATA3 drive bays |
| Fans | 4x 4cm chassis internal fan Optional 2x 40x28mm PWM fan |
| AC Voltage | 100-240 V, 50-60 Hz, 4.2-1.8 Amp |
| +5V | Max: 16 Amp / Min: 0.5A |
| +12V | Max: 28 Amp / Min: 0.5A |
| +3.3V | Max: 15 Amp |
| +5V standby | Max: 3 Amp |
| -12V | Max: 0.5 Amp |
| Certification | Platinum Level |
| BIOS Type | 8MB SPI Flash EEPROM with AMI BIOS |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
HOW THIS PRODUCT FITS YOUR SYSTEM
Choose how you plan to use this product.
Match the processor generation, socket population and required heatsink.
Check the installed modules, supported type and population rules.
Use this checklist to describe the change. The host system and full configuration determine which parts will fit.
YOUR QUOTE REQUEST
Add the quantity, options and installation details you want us to quote.
Confirm the exact manufacturer part number, host compatibility and included components. Optional software is quoted separately only when requested.
SUPPORT & REPLACEMENT
Check support dates, replacement options and whether continued use still makes sense.
We do not have confirmed sales and support dates for this part number.
Send us the full SYS-1019S-MC0T order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusProducts with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.USING HARDWARE RESPONSIBLY
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
Use measured average input power for the same workload. PSU ratings and processor TDP are different from total system power.
Energy difference = (current W − proposed W) × hours × units ÷ 1,000. Excludes cooling, embodied emissions and purchase costs.CONNECTION DETAILS
Choose the host adapters around the workload and the storage protocol. A server NIC, Fibre Channel HBA and SAS HBA serve different connections.
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Supermicro SYS-1019S-MC0T enterprise server, manufacturer order code SYS-1019S-MC0T. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
The listed processor, memory, storage, expansion, networking, cooling and power values are manufacturer platform capabilities or limits. Optional and supported components are not installed unless the exact source row explicitly states inclusion.
Software and operating systems shown are platform listings; licenses and subscriptions are not assumed to be included. The saved manufacturer Product SKUs section identifies this order code as Discontinued SKU (EOL). Confirm the exact revision, regional order code, configuration and current supply before ordering.
Before you request a quote
Include the full model, manufacturer P/N, revision and quantity.
Tell us the host model, generation, installed configuration and required supporting hardware.
Specify condition, testing requirements, destination and requested delivery date.
Enterprise Server
P/NSYS-1018D-FRN8T
Enterprise Server
P/NSYS-1018GR-T
Enterprise Server
P/NSYS-1018L-MP
Enterprise Server
P/NSYS-1018R-WC0R
