Loading products and specifications…
Enterprise ServerBuild around your workload
Supermicro SYS-2028U-TRT+ enterprise server, manufacturer order code SYS-2028U-TRT+. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestSupermicro / PRODUCT DETAILS
See what is installed, then compare it with the platform limits. The maximum supported configuration may be different from what ships with this unit.
KEY SPECIFICATIONS / 01
Tell us which system or service this product is for. We do not have details for this section yet.
Confirm drive carriers, backplane, controller and any required cables.
Supermicro / ORDER & INSTALLATION DETAILS
Identify the complete system SKU and board revision.
Check the supported chassis, backplane and riser combination.
Include required cables, cooling parts and drive carriers in the order.
Technical overview
Use the full part number when comparing options or asking about system fit.
| Manufacturer model | SYS-2028U-TRT+ |
|---|---|
| Ordering P/N | SYS-2028U-TRT+ |
| Product type | Manufacturer system order code; listed processor, memory, storage, expansion, networking, cooling and power details describe platform capabilities or limits unless the source explicitly states installed components |
| Manufacturer category | Server System |
| CPU | Intel® Xeon® processor E5-2600 v4 † / v3 family (up to 160W TDP) * Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 22 Cores † / Up to 55MB † Cache |
| System Bus | QPI up to 9.6 GT/s |
| Processor/Cache — Note | † BIOS version 2.0 or above is required |
| Processor/Cache — Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| Memory Capacity | 24x 288-pin DDR4 DIMM slots Up to 3TB † ECC 3DS LRDIMM, 768GB ECC RDIMM |
| Memory Type | 2400 † /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit 2666/2400 ECC DDR4 NVDIMM |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB NVDIMM: 16GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| Chipset | Intel® C612 chipset |
| On-Board Devices — SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Connectivity | 2x 10GBase-T ports via AOC-2UR68-i2XT Intel® X540 10GBase-T 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | ASPEED AST2400 BMC |
| Input / Output — SATA | 10x SATA3 (6Gbps) ports |
| SAS | 24x SAS3 ports support via optional Add-on Cards |
| LAN | 2x 10GBase-T LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A) |
| Video | 1x VGA Connector |
| Serial Port / Header | 1x Serial header |
| DOM | 2x Super DOM (Disk on Module) ports |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| Management software listed for this platform | SuperDoctor® 5 Intel® Node Manager 3.0 Watch Dog NMI SUM and SSM Optional IPMI 1.5 / 2.0 |
| Power Configurations | ACPI Power Management Power-on mode for AC power recovery |
| Form Factor | 2U Rackmount |
| Model | CSE-219UAC-R1K02 |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 27.76" (705.3mm) |
| Weight | Net Weight: 36 lbs (16.4 kg) Gross Weight: 72 lbs (32.7 kg) |
| Available Colors | Black |
| Buttons | Power On/Off button System Reset button UID button |
| LEDs | Power status LED HDD activity LED 2x Network activity LEDs System information (overheat/UID) LED |
| PCI-Express | 1x PCI-E 3.0 x16 slot (FH, 10.5" L) 7x PCI-E 3.0 x8 slots (5x FH, 10.5" L, 1x LP, 1x Internal LP) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| Hot-swap | 24x Hot-swap 2.5" Drive Bays: 10x SATA3 ports by default Optional drive support: 24x SAS3 Note: optional storage card is required to support more than 10 drives. |
| Fans | 4x 8cm heavy duty PWM fans |
| Total Output Power | 800W: 100 – 127Vac 1000W: 200 – 240Vac 1000W: 200 – 240Vdc (for CCC only) |
| Dimension (W x H x L) | 73.5 x 40 x 203 mm |
| Input | 100-127Vac / 9.8 - 7A / 50-60Hz 200-240Vac / 7 - 5A / 50-60Hz 200-240Vdc / 7 - 5A (for CCC only) |
| +12V | Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) Max: 83A / Min: 0A (200-240Vdc) |
| 12Vsb | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | Titanium Level [ Test Report ] |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator |
| FAN | 8x 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Support to monitor Supermicro AOC temperatures from IPMI or SD 5 Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
| LED | Memory DIMM ECC error LEDs CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
| Other Features | 4x 8-pin GPU power connectors Chassis intrusion detection Chassis intrusion header SDDC Support RoHS |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 5°C to 40°C (41°F to 104°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
HOW THIS PRODUCT FITS YOUR SYSTEM
Choose how you plan to use this product.
Match the processor generation, socket population and required heatsink.
Check the installed modules, supported type and population rules.
Use this checklist to describe the change. The host system and full configuration determine which parts will fit.
YOUR QUOTE REQUEST
Add the quantity, options and installation details you want us to quote.
Confirm the exact manufacturer part number, host compatibility and included components. Optional software is quoted separately only when requested.
SUPPORT & REPLACEMENT
Check support dates, replacement options and whether continued use still makes sense.
We do not have confirmed sales and support dates for this part number.
Send us the full SYS-2028U-TRT+ order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusProducts with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.USING HARDWARE RESPONSIBLY
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
Use measured average input power for the same workload. PSU ratings and processor TDP are different from total system power.
Energy difference = (current W − proposed W) × hours × units ÷ 1,000. Excludes cooling, embodied emissions and purchase costs.CONNECTION DETAILS
Choose the host adapters around the workload and the storage protocol. A server NIC, Fibre Channel HBA and SAS HBA serve different connections.
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Supermicro SYS-2028U-TRT+ enterprise server, manufacturer order code SYS-2028U-TRT+. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
The listed processor, memory, storage, expansion, networking, cooling and power values are manufacturer platform capabilities or limits. Optional and supported components are not installed unless the exact source row explicitly states inclusion.
Software and operating systems shown are platform listings; licenses and subscriptions are not assumed to be included. The saved manufacturer Product SKUs section identifies this order code as Discontinued SKU (EOL). Confirm the exact revision, regional order code, configuration and current supply before ordering.
Before you request a quote
Include the full model, manufacturer P/N, revision and quantity.
Tell us the host model, generation, installed configuration and required supporting hardware.
Specify condition, testing requirements, destination and requested delivery date.
Enterprise Server
P/NSYS-1018D-FRN8T
Enterprise Server
P/NSYS-1018GR-T
Enterprise Server
P/NSYS-1018L-MP
Enterprise Server
P/NSYS-1018R-WC0R
