Loading products and specifications…
Enterprise ServerBuild around your workload
Supermicro SYS-6029U-E1CR25M enterprise server, manufacturer order code SYS-6029U-E1CR25M. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestSupermicro / PRODUCT DETAILS
See what is installed, then compare it with the platform limits. The maximum supported configuration may be different from what ships with this unit.
KEY SPECIFICATIONS / 01
Tell us which system or service this product is for. We do not have details for this section yet.
Confirm drive carriers, backplane, controller and any required cables.
Supermicro / ORDER & INSTALLATION DETAILS
Identify the complete system SKU and board revision.
Check the supported chassis, backplane and riser combination.
Include required cables, cooling parts and drive carriers in the order.
Technical overview
Use the full part number when comparing options or asking about system fit.
| Manufacturer model | SYS-6029U-E1CR25M |
|---|---|
| Ordering P/N | SYS-6029U-E1CR25M |
| Product type | Manufacturer system order code; listed processor, memory, storage, expansion, networking, cooling and power details describe platform capabilities or limits unless the source explicitly states installed components |
| Manufacturer category | Server System |
| Processor — CPU | Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s Support CPU TDP 70-205W |
| Cores | Up to 28 Cores |
| Processor — Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) |
| Memory Capacity | 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM Supports Intel® Optane™ DCPMM †† |
| Memory Type | 2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM 2666 ECC DDR4 NVDIMM |
| System Memory — Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info. |
| Chipset | Intel® C621 chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| Network Connectivity | 2 25GbE SFP28 ports via AOC-2UR68-M2TS-O (Mellanox ConnectX-4 Lx EN) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Graphics | ASPEED AST2500 BMC |
| SAS | 12 SAS3 ports via expander and AOC |
| LAN | 2 25GbE SFP28 ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 3 USB 3.0 ports (2 rear, 1 Type A) |
| Video | 2 VGA ports (1 rear, 1 onboard) |
| Serial Port / Header | 1 Serial header |
| DOM | 2 Super DOM (Disk on Module) ports |
| BIOS Type | AMI 32Mb SPI Flash ROM |
| Management software listed for this platform | Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM , SPM , SUM SuperDoctor® 5 |
| Power Configurations | ACPI Power Management |
| PC Health Monitoring — CPU | Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator |
| FAN | Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for fan connectors |
| Form Factor | 2U Rackmount |
| Model | CSE-829U2E1C4-R1K02-T |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 28.46" (723mm) |
| Weight | Net Weight: 36 lbs (16.4 kg) Gross Weight: 72 lbs (32.7 kg) |
| Available Colors | Black |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power status LED HDD activity LED Network activity LEDs System information (overheat/UID) LED |
| PCI-Express | 1 PCI-E 3.0 x16 (FH, 10.5" L) 5 PCI-E 3.0 x8 (FH, 10.5" L) 1 PCI-E 3.0 x8 (LP) 1 PCI-E 3.0 x8 (internal LP) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| Hot-swap | 12 Hot-swap 3.5" drive bays 12 SAS3 via opt. AOC (4 hybrid ports - opt. 4 NVMe) Note: Storage Add-on card is required |
| M.2 | 1 M.2 PCI-E 3.0 x4 M-Key NVMe or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional riser card (see optional parts list) 2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2 |
| Fans | 4 Heavy duty 8cm PWM fans |
| Total Output Power | 800W: 100 – 127Vac 1000W: 200 – 240Vac 1000W: 200 – 240Vdc (for CCC only) |
| Dimension (W x H x L) | 73.5 x 40 x 203 mm |
| Input | 100-127Vac / 9.8 - 7A / 50-60Hz 200-240Vac / 7 - 5A / 50-60Hz 200-240Vdc / 7 - 5A (for CCC only) |
| +12V | Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) Max: 83A / Min: 0A (200-240Vdc) |
| 12Vsb | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | Titanium Level [ Test Report ] |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
HOW THIS PRODUCT FITS YOUR SYSTEM
Choose how you plan to use this product.
Match the processor generation, socket population and required heatsink.
Check the installed modules, supported type and population rules.
Use this checklist to describe the change. The host system and full configuration determine which parts will fit.
YOUR QUOTE REQUEST
Add the quantity, options and installation details you want us to quote.
Confirm the exact manufacturer part number, host compatibility and included components. Optional software is quoted separately only when requested.
SUPPORT & REPLACEMENT
Check support dates, replacement options and whether continued use still makes sense.
We do not have confirmed sales and support dates for this part number.
Send us the full SYS-6029U-E1CR25M order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusProducts with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.USING HARDWARE RESPONSIBLY
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
Use measured average input power for the same workload. PSU ratings and processor TDP are different from total system power.
Energy difference = (current W − proposed W) × hours × units ÷ 1,000. Excludes cooling, embodied emissions and purchase costs.CONNECTION DETAILS
Choose the host adapters around the workload and the storage protocol. A server NIC, Fibre Channel HBA and SAS HBA serve different connections.
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Supermicro SYS-6029U-E1CR25M enterprise server, manufacturer order code SYS-6029U-E1CR25M. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
The listed processor, memory, storage, expansion, networking, cooling and power values are manufacturer platform capabilities or limits. Optional and supported components are not installed unless the exact source row explicitly states inclusion.
Software and operating systems shown are platform listings; licenses and subscriptions are not assumed to be included. The saved manufacturer Product SKUs section identifies this order code as Discontinued SKU (EOL). Confirm the exact revision, regional order code, configuration and current supply before ordering.
Before you request a quote
Include the full model, manufacturer P/N, revision and quantity.
Tell us the host model, generation, installed configuration and required supporting hardware.
Specify condition, testing requirements, destination and requested delivery date.
Enterprise Server
P/NSYS-1018D-FRN8T
Enterprise Server
P/NSYS-1018GR-T
Enterprise Server
P/NSYS-1018L-MP
Enterprise Server
P/NSYS-1018R-WC0R
