Loading products and specifications…
Design the WAN connection
Ubiquiti EP-R8 is a router. Interfaces: (1) RJ45 serial port (1) RJ45 PoE In port (6) 10/100/1000 RJ45 ports (2) 10/100/1000 RJ45/SFP combination ports. Hardware specification: Dual-core 600 MHz, MIPS64 with hardware acceleration for packet processing.
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestUbiquiti / PRODUCT DETAILS
Treat interfaces, forwarding requirements and software entitlements as separate parts of the routing design.
Tell us which system or service this product is for. We do not have details for this section yet.
Identify each WAN handoff, line card and transceiver.
View all specifications →Ubiquiti / ORDER & INSTALLATION DETAILS
Keep UniFi, UISP and other product-family identities distinct.
Confirm the controller or management arrangement for the exact device.
Check power input, antenna, mounting and regional radio requirements.
Technical overview
Use the full part number when comparing options or asking about system fit.
| Manufacturer | Ubiquiti |
|---|---|
| Manufacturer part number | EP-R8 |
| Dimensions | Without wall-mount: 326.6 x 382.7 x 88.8 mm (12.9 x 15.1 x 3.5") With wall-mount: 326.6 x 382.7 x 105.5 mm (12.9 x 15.1 x 4.2") |
| Weight | Without wall-mount: 3.4 kg (7.5 lb) With wall-mount: 3.8 kg (8.4 lb) |
| Enclosure material | Diecast aluminum alloy, UV-resistant polycarbonate |
| Mount | Pole/wall mount |
| Wind loading | 153 N at 200 km/h (34 lbf at 125 mph) |
| Wind survivability | 200 km/h (125 mph) |
| Processor | Dual-core 600 MHz, MIPS64 with hardware acceleration for packet processing |
| System memory | 2 GB DDR3-1600 RAM |
| Code storage | 4 GB |
| Networking interface | (1) RJ45 serial port (1) RJ45 PoE In port (6) 10/100/1000 RJ45 ports (2) 10/100/1000 RJ45/SFP combination ports |
| Power supply | Min. 54V / 0.8A (Excludes PoE output) |
| Passive PoE output | (2) 54V or 24V / 1.4A, 4-pair (+1, 2, 4, 5; -3, 6, 7, 8) passive PoE, eth1 to eth2 (5) 24V / 0.7A, 2-pair (+4, 5; -7, 8) passive PoE, eth3 to eth7 |
| Power monitoring | (1) DC terminal block, input power (2) RJ45, PoE In and eth0, input power |
| Supported voltage range | 56–42V DC |
| Max. power consumption | 40W (Excludes PoE output) |
| Button | Factory reset |
| LEDs | System: Power Data ports: speed/link/activity, PoE SFP ports: speed/link/activity |
| Ambient operating temperature | -40 to 65° C (-40 to 149° F) |
| Ambient operating humidity | 10 to 90% noncondensing |
HOW THIS PRODUCT FITS YOUR NETWORK
Choose how you plan to use this product.
Identify each WAN handoff, line card and transceiver.
EP-R8: check wan interfaces and traffic requirements.
This sketch helps describe your request. We will confirm protocols, port counts, coverage and failover when quoting.
YOUR QUOTE REQUEST
Add the quantity, options and installation details you want us to quote.
Include the full Ubiquiti model or part number, required revision and host configuration. List software and service requirements separately.
No license options are listed for this part number. If you need software, add its manufacturer part number and we will check it with the hardware.
SUPPORT & REPLACEMENT
Check support dates, replacement options and whether continued use still makes sense.
We do not have confirmed sales and support dates for this part number.
Send us the full EP-R8 order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusProducts with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.USING HARDWARE RESPONSIBLY
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
Use measured average input power for the same workload. PSU ratings and processor TDP are different from total system power.
Energy difference = (current W − proposed W) × hours × units ÷ 1,000. Excludes cooling, embodied emissions and purchase costs.CONNECTION DETAILS
Check the protocol and port requirements of the equipment you intend to connect. Ethernet, Fibre Channel, InfiniBand and carrier interfaces are not interchangeable.
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Ubiquiti EP-R8 is a router. Interfaces: (1) RJ45 serial port (1) RJ45 PoE In port (6) 10/100/1000 RJ45 ports (2) 10/100/1000 RJ45/SFP combination ports. Hardware specification: Dual-core 600 MHz, MIPS64 with hardware acceleration for packet processing.
Start with your WAN handoff, LAN ports and routing requirements. Check performance with the services you plan to enable, along with any software entitlement and power or mounting options.
Before you request a quote
Include the full model, manufacturer P/N, revision and quantity.
Tell us the host model, generation, installed configuration and required supporting hardware.
Specify condition, testing requirements, destination and requested delivery date.
Enterprise Router
P/NER-12
Enterprise Router
P/NEP-R6
Enterprise Router
P/NER-10X
Enterprise Router
P/NER-12P
