Loading products and specifications…
Enterprise hardware / Juniper
Shop Juniper MX2000 hardware. Compare specifications and ask our team about configurations, compatible parts and pricing.
Match the full model and manufacturer part number.
Review interfaces, power and compatible platform options.
Confirm the configuration and included items in your quotation.
Page 1 of 1 · 1–19 of 19
Power Cables
P/NCBL-MX2000-3PH-DELTA-S
The Juniper CBL-MX2000-3PH-DELTA-S is a delta AC power cord listed for North America. Its IEC 309 plug is rated at 60 A and 250 V, and the cord is 4.5 meters long.
Power Cables
P/NCBL-MX2000-3PH-WYE-S
The Juniper CBL-MX2000-3PH-WYE-S is a wye AC power cord listed for Continental Europe. Its IEC 309 plug is rated at 32 A and 400 V, and the cord is 4.5 meters long.
Transport Kits
P/NMX2K-TRNSPRT-KIT
The Juniper MX2K-TRNSPRT-KIT is a transport kit for MX2010 and MX2020 routers. It includes a transport platform, left and right mounting plates with adjustable wheel assemblies, and a winch mount with a strap plate. The kit weighs approximately 62.82 kg. In the MX2020 installation, captive screws secure the mounting plates to the chassis.
Craft Interfaces
P/NMX2K-FPD-KIT-S
The Juniper MX2K-FPD-KIT-S is an extended craft interface panel. In the MX2020 router, it sits above the upper fan tray and provides additional maintenance clearance for the extended cable manager. It supports hot insertion and removal and includes alarm relay contacts and an alarm cutoff button.
Fan Trays
P/NMX2000-FANTRAY-S
The Juniper MX2000-FANTRAY-S is the spare base fan tray for the MX2000 platform. In the MX2020 cooling system, each tray contains six 172 mm fans and supports hot insertion and removal. A double safety latch controls tray removal, and fan speed adjusts to cooling demand.
Rack Mount Kits
P/NMX2000-MOUNT-TRAY-S
The Juniper MX2000-MOUNT-TRAY-S is a four-post rack mounting tray. In the MX2020 installation, the shelf attaches at the front of the rear rails and extends toward the front of the rack. Its rear flanges adjust from 24 to 30.6 inches.
Line Card Adapters
P/NMX2000-LC-ADAPTER
MX2000-LC-ADAPTER is the MPC adapter required for using MPC1 through MPC5, MPC7 and MS-MPC modules in MX2000 systems.
Installation Accessories
P/NMX2000-PLLT-JCK-ADPTR
The Juniper MX2000-PLLT-JCK-ADPTR is a pallet jack adapter for MX2010 and MX2020 routers. Its platform spans both pallet jack legs, with four adjustable brackets fitting beneath the legs. Eight shipping-support torque fasteners on the top of the platform are removed during the documented installation procedure.
Switch Fabric Boards
P/NMX2000-SFB2-BB
MX2000-SFB2-BB is a Switch Fabric Board 2 ordering item for MX2010 and MX2020 systems. Confirm the required fabric-board population for the complete chassis.
Switch Fabric Boards
P/NMX2000-SFB-S
MX2000-SFB-S is an MX2000 switch fabric board weighing 12 lb (5.44 kg), with a 1.7-inch width, 23.6-inch body depth and 16.225-inch height. The ejector handle extends the depth to 26.14 inches.
EMI Covers
P/NMX2000-EMI-COVER-S
The Juniper MX2000-EMI-COVER-S is a standard EMI card cage cover for the MX2020 router. Four captive screws fasten it to the chassis front-mounting flanges outside the card cage. Align all four screws with the flange holes before securing the cover.
Rack Mount Kits
P/NMX2K-TRAY-XTND-S
The Juniper MX2K-TRAY-XTND-S provides extension brackets for the MX2020 four-post rack mounting tray. The brackets adjust from 30 to 36.6 inches to accommodate greater rack depth. The rack mount tray is purchased separately.
Switch Fabric Boards
P/NMX2000-SFB2-R
MX2000-SFB2-R is a Switch Fabric Board 2 ordering item for MX2010 and MX2020 systems. Confirm the required fabric-board population for the complete chassis.
Switch Fabric Boards
P/NMX2000-SFB2-S
MX2000-SFB2-S is an MX2000 switch fabric board weighing 16 lb (7.2 kg), with a 1.7-inch width, 23.6-inch body depth and 16.225-inch height. The ejector handle extends the depth to 26.14 inches.
Craft Interface Panels
P/NMX2008-CRAFT-S
The Juniper MX2008-CRAFT-S is a spare craft interface panel for the MX2008 router. It provides component status indicators, alarm relay contacts and an alarm cutoff/lamp test button. The panel supports hot insertion and removal.
Craft Interface Panels
P/NMX2020-CRAFT-S
The Juniper MX2020-CRAFT-S is a spare craft interface panel for the MX2020 router. It provides component status indicators, alarm relay contacts and an alarm cutoff/lamp test button. The panel supports hot insertion and removal.
Power Distribution Modules
P/NMX2000-PDM-DC-BB
MX2000-PDM-DC-BB is a DC power-distribution module for MX2000 systems, documented as a base-bundle ordering item.
Air Baffles
P/NMX2000-UPR-BAFFLE
The Juniper MX2000-UPR-BAFFLE mounts to the MX2020 upper fan tray access door with four captive screws. The documented maximum screw torque is 8.0 lb-in (0.90 Nm). Fixed louvers have a 10-degree angle; adjustable louvers must be set to a 10-degree upward angle to direct exhaust air away from the router.
Craft Interface Panels
P/NMX2010-CRAFT-S
The Juniper MX2010-CRAFT-S is a spare craft interface panel for the MX2010 router. It provides component status indicators, alarm relay contacts and an alarm cutoff/lamp test button. The panel supports hot insertion and removal.
