Connector arrangement
- Optical endpoints
- ST to LC
Check every connector, including each branch of a breakout cable.
AddOnFiber optic cables
CablingADD-ST-LC-4M6MMFPCabling · Category illustrationAsk for photos of the exact model and configuration.
Use the full model, manufacturer part number and revision. Your quotation will list the condition and included components.
Specify the complete connection
AddOn ADD-ST-LC-4M6MMFP — 4m OM1 ST to LC fiber patch cable
P/N ADD-ST-LC-4M6MMFP
AddOn ADD-ST-LC-4M6MMFP is a fiber patch cable. Listed length: 4m. Connection: ST to LC. Cable specification: OM1. Fiber arrangement: Duplex. Jacket: OFNP (Plenum-Rated).
- Cable type
- Fiber Patch Cable
- Cable length
- 4m
- Media
- MMF
- Jacket
- OFNP (Plenum-Rated)
Request pricingQuoted to your requirements
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestConfiguration helpAsk about international delivery
AddOn / PRODUCT DETAILS
Cable connections and installation
Review the connector arrangement, link requirements and cable route. For breakout cables, identify every connected port and the required host port mode.
Cable route & specification
- Cable type
- Fiber Patch Cable
- Cable length
- 4m
Allow for routing, bend radius and the supported signaling and cable length.
Host compatibility
Confirm the equipment, firmware and port settings at every connection.
Enter both endpoints so we can check the connection.
Add endpoints to your request →AddOn / ORDER & INSTALLATION DETAILS
Ordering AddOn hardware
01
Use the complete AddOn model or manufacturer part number.
02
Match the stated specifications to your equipment and installation.
03
List required accessories separately and confirm the supplied configuration.
Tell us about your existing equipment
Technical overview
Technical specifications
Use the full part number when comparing options or asking about system fit.
12 of 12 specifications
| Brand | AddOn |
|---|---|
| Manufacturer part number | ADD-ST-LC-4M6MMFP |
| Product type | fiber patch cable |
| Cable type | Fiber Patch Cable |
| Cable length | 4m |
| Media | MMF |
| Jacket | OFNP (Plenum-Rated) |
| Fiber grade | OM1 |
| Cable color | Orange |
| Installation statement | Plenum |
| Duplex format | Duplex |
| Optical endpoints | ST to LC |
02
HOW THIS PRODUCT FITS YOUR NETWORK
See where it fits in your network
Choose how you plan to use this product.
New connection
Connectors and pinout at both ends
Check every connector, including each branch of a breakout cable.
- Connectors and pinout at both ends
- Length, routing and bend radius
- Host qualification and signal standard
New connectionConnection overview
Connection media
ADD-ST-LC-4M6MMFP: check connectors and pinout at both ends.
This sketch helps describe your request. We will confirm protocols, port counts, coverage and failover when quoting.
03
YOUR QUOTE REQUEST
Tell us what you need
Add the quantity, options and installation details you want us to quote.
Include the full AddOn model or part number, required revision and host configuration. List software and service requirements separately.
04
SUPPORT & REPLACEMENT
Plan for support and future replacement
Check support dates, replacement options and whether continued use still makes sense.
Support dates
We do not have confirmed sales and support dates for this part number.
Send us the full ADD-ST-LC-4M6MMFP order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusChoosing a replacement
Products with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.What should I compare?
- Physical fit, connectors and power
- Capacity and required performance
- Software, firmware and feature support
- Licensing, service coverage and data and configuration migration
USING HARDWARE RESPONSIBLY
Maintain, redeploy or replace
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
CONNECTION DETAILS
Cable and transceiver compatibility
Match both endpoints before selecting this cable or transceiver. Connector shape and nominal speed alone do not establish interoperability.
CONNECTS TOQualified port on the first device
ADD-ST-LC-4M6MMFPFiber optic cables
USED FORQualified port on the peer device
What to check before installation
- Both host platforms, port type and supported module coding
- Protocol, reach, fiber or copper medium and connector polarity
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Features and applications
Product overview
AddOn ADD-ST-LC-4M6MMFP is a fiber patch cable. Listed length: 4m. Connection: ST to LC. Cable specification: OM1. Fiber arrangement: Duplex. Jacket: OFNP (Plenum-Rated).
Match the optical connection
Check fiber grade, the connector and polish at both ends, fiber count and polarity against the equipment and existing cabling. Similar connector shapes do not confirm interchangeability. Do not assume an APC connection can be mated to a UPC connection. Confirm optical loss limits and the required link arrangement.
Route and jacket requirements
Use the listed 4m length when planning the route, with allowance for service loops, connector clearance and strain relief. Check the stated jacket and installation designation against the actual pathway and local requirements. Indoor, outdoor, riser, plenum and low-smoke descriptions are not interchangeable; no unstated rating is assumed.
Pricing and delivery
Send the full AddOn part number, quantity, cable route and delivery destination. We confirm condition, packaging, included items, availability and the final amount before bank transfer. Ask for label and connector photographs if required for acceptance.
Compare related cables
- AddOn cables and network parts
- Network equipment and cabling
- Request ADD-ST-LC-4M6MMFP pricing
- AddOn ADD-ST-LC-4MS6MMF — 4m OM1 ST to LC fiber patch cable
- AddOn ADD-ST-LC-4MS6MMFLZ — 4m OM1 ST to LC fiber patch cable
- AddOn ADD-ST-LC-4M6MMFLZ — 4m OM1 ST to LC fiber patch cable
- AddOn ADD-ST-LC-4MS6MMFP — 4m OM1 ST to LC fiber patch cable
Compare endpoints, cable grade, length, jacket, polarity and pack quantity before choosing. Related cables are not automatically interchangeable.
Before you request a quote
Ordering and delivery
Model and quantity
Include the full model, manufacturer P/N, revision and quantity.
Your existing equipment
Tell us the host model, generation, installed configuration and required supporting hardware.
Delivery requirements
Specify condition, testing requirements, destination and requested delivery date.