Connector arrangement
- Endpoints
- SFP28 to SFP28
Check every connector, including each branch of a breakout cable.
AddOnDirect attach cables
CablingE25G-SFP28-TWX-P-00501-AOCabling · Category illustrationAsk for photos of the exact model and configuration.
Use the full model, manufacturer part number and revision. Your quotation will list the condition and included components.
Specify the complete connection
AddOn E25G-SFP28-TWX-P-00501-AO — 0.5m SFP28 to SFP28 direct attach cable
P/N E25G-SFP28-TWX-P-00501-AO
AddOn E25G-SFP28-TWX-P-00501-AO is a direct attach cable. Length: 0.5m. The endpoints are SFP28 to SFP28. Signaling: 25GBase-CU. Cable technology: Passive Twinax. This AddOn replacement is offered for Brocade applications; check the exact equipment and port settings at both ends.
- Cable type
- Direct Attach Cable
- Cable length
- 0.5m
- Signaling standard
- 25GBase-CU
- Cable technology
- Passive Twinax
Request pricingQuoted to your requirements
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestConfiguration helpAsk about international delivery
AddOn / PRODUCT DETAILS
Cable connections and installation
Review the connector arrangement, link requirements and cable route. For breakout cables, identify every connected port and the required host port mode.
Cable route & specification
- Cable type
- Direct Attach Cable
- Cable length
- 0.5m
- Signaling standard
- 25GBase-CU
- Cable technology
- Passive Twinax
Allow for routing, bend radius and the supported signaling and cable length.
Host compatibility
- Compatibility range
- Brocade applications
Confirm the equipment, firmware and port settings at every connection.
Enter both endpoints so we can check the connection.
Add endpoints to your request →AddOn / ORDER & INSTALLATION DETAILS
Ordering AddOn hardware
01
Use the complete AddOn model or manufacturer part number.
02
Match the stated specifications to your equipment and installation.
03
List required accessories separately and confirm the supplied configuration.
Tell us about your existing equipment
Technical overview
Technical specifications
Use the full part number when comparing options or asking about system fit.
10 of 10 specifications
| Brand | AddOn |
|---|---|
| Manufacturer part number | E25G-SFP28-TWX-P-00501-AO |
| Product type | direct attach cable |
| Cable type | Direct Attach Cable |
| Cable length | 0.5m |
| Signaling standard | 25GBase-CU |
| Cable technology | Passive Twinax |
| Endpoints | SFP28 to SFP28 |
| Compatibility range | Brocade applications |
| Product origin | AddOn replacement; not an OEM-branded Brocade cable |
02
HOW THIS PRODUCT FITS YOUR NETWORK
See where it fits in your network
Choose how you plan to use this product.
New connection
Connectors and pinout at both ends
Check every connector, including each branch of a breakout cable.
- Connectors and pinout at both ends
- Length, routing and bend radius
- Host qualification and signal standard
New connectionConnection overview
Connection media
E25G-SFP28-TWX-P-00501-AO: check connectors and pinout at both ends.
This sketch helps describe your request. We will confirm protocols, port counts, coverage and failover when quoting.
03
YOUR QUOTE REQUEST
Tell us what you need
Add the quantity, options and installation details you want us to quote.
Include the full AddOn model or part number, required revision and host configuration. List software and service requirements separately.
04
SUPPORT & REPLACEMENT
Plan for support and future replacement
Check support dates, replacement options and whether continued use still makes sense.
Support dates
We do not have confirmed sales and support dates for this part number.
Send us the full E25G-SFP28-TWX-P-00501-AO order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusChoosing a replacement
Products with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.What should I compare?
- Physical fit, connectors and power
- Capacity and required performance
- Software, firmware and feature support
- Licensing, service coverage and data and configuration migration
USING HARDWARE RESPONSIBLY
Maintain, redeploy or replace
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
CONNECTION DETAILS
Cable and transceiver compatibility
Match both endpoints before selecting this cable or transceiver. Connector shape and nominal speed alone do not establish interoperability.
CONNECTS TOQualified port on the first device
E25G-SFP28-TWX-P-00501-AODirect attach cables
USED FORQualified port on the peer device
What to check before installation
- Both host platforms, port type and supported module coding
- Protocol, reach, fiber or copper medium and connector polarity
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Features and applications
Product overview
AddOn E25G-SFP28-TWX-P-00501-AO is a direct attach cable. Length: 0.5m. The endpoints are SFP28 to SFP28. Signaling: 25GBase-CU. Cable technology: Passive Twinax. This AddOn replacement is offered for Brocade applications; check the exact equipment and port settings at both ends.
Match both ends of the connection
Use the complete P/N E25G-SFP28-TWX-P-00501-AO. Check the switch, adapter or server port at each end, supported protocol, software release and cable qualification. The Brocade application range does not confirm compatibility with every model from that manufacturer. For a breakout connection, confirm the required port-split mode and lane assignment; the aggregate rate does not confirm the rate of each branch.
Cable length and installation
The specified length is 0.5m. Allow room for the actual rack route, connector clearance and strain relief. Follow the cable and equipment installation limits for bend radius, power and cooling; these limits must not be inferred from cable length alone.
Twinax cable selection
Match the specified cable technology to both host ports. A matching connector and nominal signaling rate alone are not enough to establish compatibility.
Pricing and delivery
Send the full AddOn part number, quantity, equipment at both ends and delivery destination. We confirm the offered condition, included items, availability and final amount before bank transfer. Request photographs of the offered cable and labels for your acceptance check.
Compare network cables
- AddOn network cables and parts
- Network switches, routers and cables
- Request E25G-SFP28-TWX-P-00501-AO pricing
- AddOn SFP-28G-PDAC2M-BR-AO — 2m SFP28 to SFP28 direct attach cable
- AddOn 25G-SFP28-TWX-P-0301-AO — 3m SFP28 to SFP28 direct attach cable
- AddOn 25G-SFP28-TWX-P-0501-AO — 5m SFP28 to SFP28 direct attach cable
- AddOn CAB-CX4-0050-AO — 50cm CX4 to CX4 direct attach cable
Compare cable technology, host support, endpoints, length and any pack quantity. These products are not automatically interchangeable.
Before you request a quote
Ordering and delivery
Model and quantity
Include the full model, manufacturer P/N, revision and quantity.
Your existing equipment
Tell us the host model, generation, installed configuration and required supporting hardware.
Delivery requirements
Specify condition, testing requirements, destination and requested delivery date.