Connector arrangement
- Connector format
- C21-C14
Check every connector, including each branch of a breakout cable.
Network cablesNCS1K4-CBL-4.25M=Cabling · Category illustrationAsk for photos of the exact model and configuration.
Use the full model, manufacturer part number and revision. Your quotation will list the condition and included components.
Specify the complete connection
Cisco NCS1K4-CBL-4.25M= cable
P/N NCS1K4-CBL-4.25M=
Cisco NCS1K4-CBL-4.25M= is a cable. Intended equipment: NCS1004. Length: 4.25 meter. Connector format: C21-C14.
- Equipment platform
- NCS1004
- Length
- 4.25 meter
- Connector format
- C21-C14
Request pricingQuoted to your requirements
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestConfiguration helpAsk about international delivery
Cisco / PRODUCT DETAILS
Cable connections and installation
Review the connector arrangement, link requirements and cable route. For breakout cables, identify every connected port and the required host port mode.
Cable route & specification
- Length
- 4.25 meter
Allow for routing, bend radius and the supported signaling and cable length.
Host compatibility
Confirm the equipment, firmware and port settings at every connection.
Enter both endpoints so we can check the connection.
Add endpoints to your request →Cisco / ORDER & INSTALLATION DETAILS
Cisco PID and orderable bundle
01
Use the complete Cisco PID, including any bundle suffix.
02
Match the host platform and supported software release.
03
Identify separately ordered interfaces, optics, software and support.
Tell us about your existing equipment
Technical overview
Technical specifications
Use the full part number when comparing options or asking about system fit.
6 of 6 specifications
| Manufacturer | Cisco |
|---|---|
| Manufacturer part number | NCS1K4-CBL-4.25M= |
| Product type | cable |
| Equipment platform | NCS1004 |
| Length | 4.25 meter |
| Connector format | C21-C14 |
02
HOW THIS PRODUCT FITS YOUR NETWORK
See where it fits in your network
Choose how you plan to use this product.
New connection
Connectors and pinout at both ends
Check every connector, including each branch of a breakout cable.
- Connectors and pinout at both ends
- Length, routing and bend radius
- Host qualification and signal standard
New connectionConnection overview
Connection media
NCS1K4-CBL-4.25M=: check connectors and pinout at both ends.
This sketch helps describe your request. We will confirm protocols, port counts, coverage and failover when quoting.
03
YOUR QUOTE REQUEST
Tell us what you need
Add the quantity, options and installation details you want us to quote.
Specify the exact Cisco PID, software release and any required feature or throughput entitlement. Hardware and licenses are separate unless the quoted bundle states otherwise.
04
SUPPORT & REPLACEMENT
Plan for support and future replacement
Check support dates, replacement options and whether continued use still makes sense.
Support dates
We do not have confirmed sales and support dates for this part number.
Send us the full NCS1K4-CBL-4.25M= order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusChoosing a replacement
Products with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.What should I compare?
- Physical fit, connectors and power
- Capacity and required performance
- Software, firmware and feature support
- Licensing, service coverage and data and configuration migration
USING HARDWARE RESPONSIBLY
Maintain, redeploy or replace
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
CONNECTION DETAILS
Cable and transceiver compatibility
Match both endpoints before selecting this cable or transceiver. Connector shape and nominal speed alone do not establish interoperability.
CONNECTS TOQualified port on the first device
NCS1K4-CBL-4.25M=Network cables
USED FORQualified port on the peer device
What to check before installation
- Both host platforms, port type and supported module coding
- Protocol, reach, fiber or copper medium and connector polarity
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Features and applications
Product overview
Cisco NCS1K4-CBL-4.25M= is a cable. Intended equipment: NCS1004. Length: 4.25 meter. Connector format: C21-C14.
Before you order
Confirm both end connectors, cable length and installation requirements before ordering.
Request a quotation
Send NCS1K4-CBL-4.25M= with the quantity and delivery destination. We will confirm availability, condition, included items and the final price before you pay.
Browse related products
More network cables
- Cisco CAB-C13-C14-JMPR cable
- Cisco CAB-IND-10A cable
- Cisco ONS-CXP2-MPO-100= cable
- Cisco ONS-CXP2-MPO-10= cable
Check the part number and supported equipment before choosing a replacement.
Before you request a quote
Ordering and delivery
Model and quantity
Include the full model, manufacturer P/N, revision and quantity.
Your existing equipment
Tell us the host model, generation, installed configuration and required supporting hardware.
Delivery requirements
Specify condition, testing requirements, destination and requested delivery date.