CredoNetwork cables

Cabling

CAC827321M2M-C1-HWCabling · Category illustrationAsk for photos of the exact model and configuration.

Use the full model, manufacturer part number and revision. Your quotation will list the condition and included components.

Specify the complete connection

Credo CAC827321M2M-C1-HW

P/N CAC827321M2M-C1-HW

Credo CAC827321M2M-C1-HW. Manufacturer part number: CAC827321M2M-C1-HW.

Connector arrangement: One800GQSFP-DDto2x400GQSFP-DD
Module form factor: QSFP-DD800type2
Nominal aggregate data rate (Gb/s): 800
Nominal data rate per branch (Gb/s): 400

Request pricingQuoted to your requirements

Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.

Configuration helpAsk about international delivery

Credo / PRODUCT DETAILS

Cable connections and installation

Review the connector arrangement, link requirements and cable route. For breakout cables, identify every connected port and the required host port mode.

CAC827321M2M-C1-HW

Connector arrangement

Connector arrangement: One800GQSFP-DDto2x400GQSFP-DD
Module form factor: QSFP-DD800type2

Check every connector, including each branch of a breakout cable.

Cable route & specification

Assembly length (m): 2.75
Length tolerance (± mm): 50
Operating case temperature range (°C, minimum to maximum): 0–70

Allow for routing, bend radius and the supported signaling and cable length.

Host compatibility

Management specification: CMIS5.0

Confirm the equipment, firmware and port settings at every connection.

Local equipment / portRemote equipment / port

Enter both endpoints so we can check the connection.

Add endpoints to your request →

Credo / ORDER & INSTALLATION DETAILS

Ordering Credo hardware

CAC827321M2M-C1-HW

Use the complete Credo model or manufacturer part number.

Match the stated specifications to your equipment and installation.

List required accessories separately and confirm the supplied configuration.

Tell us about your existing equipment

Local host model and portRemote host model and portRequired media, distance and connector

View your request ↓

Technical overview

Technical specifications

Use the full part number when comparing options or asking about system fit.

15 of 15 specifications

CAC827321M2M-C1-HW · All specifications
Manufacturer	Credo
Manufacturer P/N	CAC827321M2M-C1-HW
Product family	HiWire SHIFT active electrical cable
Connector arrangement	One800GQSFP-DDto2x400GQSFP-DD
Module form factor	QSFP-DD800type2
Nominal aggregate data rate (Gb/s)	800
Nominal data rate per branch (Gb/s)	400
Number of branches	2
Assembly length (m)	2.75
Length tolerance (± mm)	50
Management specification	CMIS5.0
Branch electrical mode selection	CMISselectable4x112Gor8x56GPAM4electricaloperation;qualifyexacthostconfiguration
Typical power at head end (W)	10
Typical power per tail end (W)	5
Operating case temperature range (°C, minimum to maximum)	0–70

HOW THIS PRODUCT FITS YOUR NETWORK

See where it fits in your network

Choose how you plan to use this product.

New connection

Connectors and pinout at both ends

Check every connector, including each branch of a breakout cable.

Connectors and pinout at both ends
Length, routing and bend radius
Host qualification and signal standard

Add notes to your request

New connectionConnection overview

Include a second path or peer device

Connection media

CAC827321M2M-C1-HW: check connectors and pinout at both ends.

This sketch helps describe your request. We will confirm protocols, port counts, coverage and failover when quoting.

YOUR QUOTE REQUEST

Tell us what you need

Add the quantity, options and installation details you want us to quote.

Include the full Credo model or part number, required revision and host configuration. List software and service requirements separately.

QuantityRequested configuration

Host system and installation details

SUPPORT & REPLACEMENT

Plan for support and future replacement

Check support dates, replacement options and whether continued use still makes sense.

Support dates

We do not have confirmed sales and support dates for this part number.

Send us the full CAC827321M2M-C1-HW order code, software release and support details before planning long-term use.

Ask us to check the current sales and support status

Choosing a replacement

Products with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.

Compare related products These products may be related, but we have not confirmed them as replacements.

What should I compare?

Physical fit, connectors and power
Capacity and required performance
Software, firmware and feature support
Licensing, service coverage and data and configuration migration

USING HARDWARE RESPONSIBLY

Maintain, redeploy or replace

Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.

MaintainCheck parts, firmware and service options.

RedeployMatch a suitable role and securely erase any retained data.

Retire responsiblyUse documented data removal and an appropriate electronics recycler.

CONNECTION DETAILS

Cable and transceiver compatibility

Match both endpoints before selecting this cable or transceiver. Connector shape and nominal speed alone do not establish interoperability.

CONNECTS TOQualified port on the first device

CAC827321M2M-C1-HWNetwork cables

USED FORQualified port on the peer device

What to check before installation

Both host platforms, port type and supported module coding
Protocol, reach, fiber or copper medium and connector polarity

Networking equipment ↗Components & accessories ↗

Browse the categories above for related equipment, then send us the full configuration so we can check the fit.

PRODUCT DETAILS

Features and applications