Connector arrangement
- Connectors
- OSFP to 4 × QSFP112
- Cooling interfaces
- Finned OSFP head; 4 flat-top QSFP112 tails
Check every connector, including each branch of a breakout cable.
Network cables980-9I75S-00N02ACabling · Category illustrationAsk for photos of the exact model and configuration.
Use the full model, manufacturer part number and revision. Your quotation will list the condition and included components.
Specify the complete connection
NVIDIA MCP7Y40-N02A 2.5 m 800G to 4 × 200G OSFP–QSFP112 DAC
P/N 980-9I75S-00N02A
MCP7Y40-N02A is a 2.5 m passive copper breakout assembly for an 800Gb/s aggregate OSFP connection. Its 4 QSFP112 tails each carry 200Gb/s. Finned OSFP head; 4 flat-top QSFP112 tails.
- Cable length
- 2.5 m
- Cable type
- Passive copper cable, 1:4 breakout
- Aggregate data rate
- 800Gb/s (2 × 400Gb/s)
- Branch data rate
- 4 × 200Gb/s
Request pricingQuoted to your requirements
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestConfiguration helpAsk about international delivery
NVIDIA / PRODUCT DETAILS
Cable connections and installation
Review the connector arrangement, link requirements and cable route. For breakout cables, identify every connected port and the required host port mode.
Cable route & specification
- Cable length
- 2.5 m
- Cable type
- Passive copper cable, 1:4 breakout
- Listed network standards
- NDR InfiniBand / 800GbE
Allow for routing, bend radius and the supported signaling and cable length.
Host compatibility
Confirm the equipment, firmware and port settings at every connection.
Enter both endpoints so we can check the connection.
Add endpoints to your request →NVIDIA / ORDER & INSTALLATION DETAILS
NVIDIA board, module and system identity
01
Distinguish a GPU board, accelerator module and complete NVIDIA system.
02
Check the qualified host, original power arrangement and cooling.
03
Review the driver or compute stack and required interconnect components.
Tell us about your existing equipment
Technical overview
Technical specifications
Use the full part number when comparing options or asking about system fit.
9 of 9 specifications
| Manufacturer | NVIDIA |
|---|---|
| Manufacturer P/N | 980-9I75S-00N02A |
| Cable length | 2.5 m |
| Cable type | Passive copper cable, 1:4 breakout |
| Aggregate data rate | 800Gb/s (2 × 400Gb/s) |
| Branch data rate | 4 × 200Gb/s |
| Connectors | OSFP to 4 × QSFP112 |
| Cooling interfaces | Finned OSFP head; 4 flat-top QSFP112 tails |
| Listed network standards | NDR InfiniBand / 800GbE |
02
HOW THIS PRODUCT FITS YOUR NETWORK
See where it fits in your network
Choose how you plan to use this product.
New connection
Connectors and pinout at both ends
Check every connector, including each branch of a breakout cable.
- Connectors and pinout at both ends
- Length, routing and bend radius
- Host qualification and signal standard
New connectionConnection overview
Connection media
980-9I75S-00N02A: check connectors and pinout at both ends.
This sketch helps describe your request. We will confirm protocols, port counts, coverage and failover when quoting.
03
YOUR QUOTE REQUEST
Tell us what you need
Add the quantity, options and installation details you want us to quote.
Include the full NVIDIA model or part number, required revision and host configuration. List software and service requirements separately.
04
SUPPORT & REPLACEMENT
Plan for support and future replacement
Check support dates, replacement options and whether continued use still makes sense.
Support dates
We do not have confirmed sales and support dates for this part number.
Send us the full 980-9I75S-00N02A order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusChoosing a replacement
Products with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.What should I compare?
- Physical fit, connectors and power
- Capacity and required performance
- Software, firmware and feature support
- Licensing, service coverage and data and configuration migration
USING HARDWARE RESPONSIBLY
Maintain, redeploy or replace
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
CONNECTION DETAILS
Cable and transceiver compatibility
Match both endpoints before selecting this cable or transceiver. Connector shape and nominal speed alone do not establish interoperability.
CONNECTS TOQualified port on the first device
980-9I75S-00N02ANetwork cables
USED FORQualified port on the peer device
What to check before installation
- Both host platforms, port type and supported module coding
- Protocol, reach, fiber or copper medium and connector polarity
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Features and applications
NVIDIA MCP7Y40-N02A 2.5 m 800G to 4 × 200G OSFP–QSFP112 DAC
MCP7Y40-N02A is a 2.5 m passive copper breakout assembly for an 800Gb/s aggregate OSFP connection. Its 4 QSFP112 tails each carry 200Gb/s. Finned OSFP head; 4 flat-top QSFP112 tails.
Confirm that the exact switch port and QSFP112 endpoints support the 4-way breakout configuration.
Match the finned or flat-top connector interfaces to the equipment's cooling and cage design.
For ConnectX-8 mezzanine platforms, copper-cable use requires NVIDIA approval for the specific product architecture.
Confirm the exact adapter, switch and firmware configuration before ordering; connector shape alone does not confirm compatibility.
Before you request a quote
Ordering and delivery
Model and quantity
Include the full model, manufacturer P/N, revision and quantity.
Your existing equipment
Tell us the host model, generation, installed configuration and required supporting hardware.
Delivery requirements
Specify condition, testing requirements, destination and requested delivery date.