Loading products and specifications…
WorkstationBuild around your workload
Supermicro SYS-5038A-I workstation, manufacturer order code SYS-5038A-I. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestSupermicro / PRODUCT DETAILS
See what is installed, then compare it with the platform limits. The maximum supported configuration may be different from what ships with this unit.
KEY SPECIFICATIONS / 01
Tell us which system or service this product is for. We do not have details for this section yet.
Confirm drive carriers, backplane, controller and any required cables.
Supermicro / ORDER & INSTALLATION DETAILS
Identify the complete system SKU and board revision.
Check the supported chassis, backplane and riser combination.
Include required cables, cooling parts and drive carriers in the order.
Technical overview
Use the full part number when comparing options or asking about system fit.
| Manufacturer model | SYS-5038A-I |
|---|---|
| Ordering P/N | SYS-5038A-I |
| Product type | Manufacturer system order code; listed processor, memory, storage, expansion, networking, cooling and power details describe platform capabilities or limits unless the source explicitly states installed components |
| Manufacturer category | Workstation System |
| Motherboard | Super X10SRA |
| CPU | Intel® Xeon® processor E5-2600 v4 † / v3, E5-1600 v4 † / v3 family or Intel® Core™ i7 series (up to 160W TDP **) Single Socket R3 (LGA 2011) |
| Core / Cache | Up to 22 Cores † / Up to 55MB † Cache |
| Processor — Note 1 | † BIOS version 2.0 or above is required |
| Processor — Note 2 | ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
| Memory Capacity | 8x 288-pin DDR4 DIMM slots Up to 1TB ECC 3DS LRDIMM Up to 512GB ECC LRDIMM Up to 256GB ECC RDIMM Up to 128GB DDR4 ECC/non-ECC UDIMM (available with Core i7 only) |
| Memory Type | 2400 † / 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
| DIMM Sizes | 3DS LRDIMM: 128GB LRDIMM: 64GB, 32GB RDIMM: 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| Chipset | Intel® C612 chipset |
| On-Board Devices — SATA | SATA3 (6Gbps) via C612 controller RAID 0, 1, 5, 10 support |
| Network Controllers | Intel® i210-AT Dual Port Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| On-Board Devices — Audio | RealTek ALC1150 High Definition Audio |
| Input / Output — SATA | 10x SATA3 (6Gbps) ports via PCH |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports |
| USB | 8x USB 3.0 ports (2 front + 6 rear) |
| Input / Output — Audio | 7.1 HD Jacks |
| Keyboard/Mouse | 1x PS/2 Keyboard/Mouse port |
| Serial Port / Header | 1x header |
| TPM | 1x TPM 1.2 20-pin Header |
| PCI-Express | 4x PCI-E 3.0 x16 slots (runs at 16/16/NA/8 or 16/8/8/8) 2x PCI-E 2.0 x1 (in x4) slots PCI-E slot #1 supports (x4) and slot #4 (x16) is disabled when an Intel Core i7-5820K is installed |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.7.1 UEFI 2.3.1 RTC (Real Time Clock) Wakeup |
| Management software listed for this platform | SuperDoctor® 5 SuperDoctor® III Watch Dog |
| Power Configurations | ACPI Power Management Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode for AC power recovery |
| Form Factor | Mid-Tower |
| Model | CSE-732D3-903B |
| Height | 16.7" (424mm) |
| Width | 7.6" (193mm) |
| Depth | 20.68" (525.3mm) |
| Weight | Gross Weight: 35.5 lbs (16.1kg) Net Weight: 29.5 lbs (13.4 kg) |
| Available Colors | Black |
| Buttons | Power On/Off button |
| LEDs | Power LED Hard drive activity LED Network activity LED System Information LED |
| Ports | 2x front USB 3.0 Ports 2x front HD/AC97 Audio Ports |
| Internal | 4x 3.5" fixed drive bays Enterprise SATA HDD only recommended |
| Peripheral | 2x 5.25" peripheral drive bays 1x card reader module |
| Fans | 1x 12cm front cooling fan |
| Power Supply | 900W AC multi output power supply |
| AC Voltage | 100-240 V, 50-60 Hz, 10-6 Amp |
| +5V Standby | 3 Amp |
| +12V1 | 25 Amp |
| +12V2 | 25 Amp |
| +12V3 | 25 Amp |
| +12V4 | 25 Amp |
| +5V | 25 Amp |
| +3.3V | 25 Amp |
| -12V | 0.5 Amp |
| Certification | Gold Level |
| Note: | • Max. continuous combined load on +3.3V and +5V output shall not exceed 155W. • Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W. |
| Voltage | +12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT |
| FAN | Total of 5 fan headers supporting up to 5 fans 5 fan headers with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support I 2 C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
HOW THIS PRODUCT FITS YOUR SYSTEM
Choose how you plan to use this product.
Match the processor generation, socket population and required heatsink.
Check the installed modules, supported type and population rules.
Use this checklist to describe the change. The host system and full configuration determine which parts will fit.
YOUR QUOTE REQUEST
Add the quantity, options and installation details you want us to quote.
Confirm the exact manufacturer part number, host compatibility and included components. Optional software is quoted separately only when requested.
SUPPORT & REPLACEMENT
Check support dates, replacement options and whether continued use still makes sense.
We do not have confirmed sales and support dates for this part number.
Send us the full SYS-5038A-I order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusProducts with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.USING HARDWARE RESPONSIBLY
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
Use measured average input power for the same workload. PSU ratings and processor TDP are different from total system power.
Energy difference = (current W − proposed W) × hours × units ÷ 1,000. Excludes cooling, embodied emissions and purchase costs.CONNECTION DETAILS
Choose the host adapters around the workload and the storage protocol. A server NIC, Fibre Channel HBA and SAS HBA serve different connections.
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Supermicro SYS-5038A-I workstation, manufacturer order code SYS-5038A-I. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
The listed processor, memory, storage, expansion, networking, cooling and power values are manufacturer platform capabilities or limits. Optional and supported components are not installed unless the exact source row explicitly states inclusion.
Software and operating systems shown are platform listings; licenses and subscriptions are not assumed to be included. No SKU-specific lifecycle statement was found in the saved manufacturer Product SKUs block; current status requires confirmation. Confirm the exact revision, regional order code, configuration and current supply before ordering.
Before you request a quote
Include the full model, manufacturer P/N, revision and quantity.
Tell us the host model, generation, installed configuration and required supporting hardware.
Specify condition, testing requirements, destination and requested delivery date.
Workstation
P/NSYS-5038A-IL
Workstation
P/NSYS-5039A-I
Workstation
P/NSYS-5039A-IL
Workstation
P/NSYS-5039AD-I
