Loading products and specifications…
WorkstationBuild around your workload
Supermicro SYS-5039A-IL workstation, manufacturer order code SYS-5039A-IL. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestSupermicro / PRODUCT DETAILS
See what is installed, then compare it with the platform limits. The maximum supported configuration may be different from what ships with this unit.
KEY SPECIFICATIONS / 01
Tell us which system or service this product is for. We do not have details for this section yet.
Confirm drive carriers, backplane, controller and any required cables.
Supermicro / ORDER & INSTALLATION DETAILS
Identify the complete system SKU and board revision.
Check the supported chassis, backplane and riser combination.
Include required cables, cooling parts and drive carriers in the order.
Technical overview
Use the full part number when comparing options or asking about system fit.
| Manufacturer model | SYS-5039A-IL |
|---|---|
| Ordering P/N | SYS-5039A-IL |
| Product type | Manufacturer system order code; listed processor, memory, storage, expansion, networking, cooling and power details describe platform capabilities or limits unless the source explicitly states installed components |
| Manufacturer category | Workstation System |
| Motherboard | Super X11SAE |
| Processor/Cache — CPU | Single Socket H4 (LGA 1151) supports: Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen Core™ i7/i5/i3, Intel® Pentium®, Intel® Celeron® processors CPU TDP up to 95W |
| Note | BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors |
| Memory Capacity | 4x 288-pin DDR4 DIMM slots Up to 64GB DDR4 ECC/Non-ECC UDIMM |
| Memory Type | 2400/2133/1866/1600MHz ECC/non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
| DIMM Sizes | 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| Chipset | Intel® C236 chipset |
| On-Board Devices — SATA | SATA3 (6Gbps) via C236 controller RAID 0, 1, 5, 10 support |
| Network Controllers | Intel I210-AT + Intel PHY i219LM Ethernet Controllers Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | 1 HDMI, 1 DVI-D, 1 Display port (Triple Display) |
| On-Board Devices — Audio | ALC 888S HD Audio |
| Input / Output — SATA | 8 SATA3 (6Gbps) ports from Intel® C236; RAID 0, 1, 5, 10 |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports |
| USB | 6 USB 3.0 ports (2 rear + 4 via headers) 8 USB 2.0 ports (2 rear + 6 via headers) 2 USB 3.1 (rear) |
| Input / Output — Audio | 7.1 HD Jacks |
| Display | 1 HDMI, 1 DVI-D, 1 Display port (Triple Display); an Intel HD Graphics Integrated CPU is required for motherboard onboard video function |
| Serial Port / Header | 2 COM ports (headers) |
| PCI-Express | 2 PCI-E 3.0 x16 slots - Function as: x16/NA or x8/x8 3 PCI-E 3.0 x1 slots |
| PCI | 2 PCI 32-bit slots |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI |
| Form Factor | Mid-Tower |
| Model | CSE-732D4-668B |
| Height | 16.7" (424mm) |
| Width | 7.6" (193mm) |
| Depth | 20.68" (525.3mm) |
| Gross Weight | 40 lbs (18.1 kg) |
| Available Colors | Black |
| Buttons | Power On/Off button |
| LEDs | Power LED Hard drive activity LED Network activity LED System Information LED |
| Ports | 2 front USB 3.0 Ports 2 front USB 2.0 Ports 2 front HD/AC97 Audio Ports |
| Internal | 4 Internal 3.5" fixed drive bays |
| Peripheral | 2x 5.25" peripheral device bays |
| Fans | 1x 12cm rear exhaust fan with Optimal Fan Speed Control Optimized cooling technology for Whisper-Quiet Operation (21dB) |
| Power Supply | 668W AC power supply |
| AC Voltage | 100 - 240V, 50-60Hz |
| +5V | 20 Amp |
| +5V standby | 2 Amp |
| +12V | Max: 54A & Min: 0.2A (100Vac-240Vac) |
| -12V | 0.1 Amp |
| +3.3V | 15 Amp |
| Certification | Platinum Certified |
| PC Health Monitoring — CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator |
| FAN | Low noise fan speed control |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
HOW THIS PRODUCT FITS YOUR SYSTEM
Choose how you plan to use this product.
Match the processor generation, socket population and required heatsink.
Check the installed modules, supported type and population rules.
Use this checklist to describe the change. The host system and full configuration determine which parts will fit.
YOUR QUOTE REQUEST
Add the quantity, options and installation details you want us to quote.
Confirm the exact manufacturer part number, host compatibility and included components. Optional software is quoted separately only when requested.
SUPPORT & REPLACEMENT
Check support dates, replacement options and whether continued use still makes sense.
We do not have confirmed sales and support dates for this part number.
Send us the full SYS-5039A-IL order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusProducts with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.USING HARDWARE RESPONSIBLY
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
Use measured average input power for the same workload. PSU ratings and processor TDP are different from total system power.
Energy difference = (current W − proposed W) × hours × units ÷ 1,000. Excludes cooling, embodied emissions and purchase costs.CONNECTION DETAILS
Choose the host adapters around the workload and the storage protocol. A server NIC, Fibre Channel HBA and SAS HBA serve different connections.
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Supermicro SYS-5039A-IL workstation, manufacturer order code SYS-5039A-IL. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
The listed processor, memory, storage, expansion, networking, cooling and power values are manufacturer platform capabilities or limits. Optional and supported components are not installed unless the exact source row explicitly states inclusion.
Software and operating systems shown are platform listings; licenses and subscriptions are not assumed to be included. No SKU-specific lifecycle statement was found in the saved manufacturer Product SKUs block; current status requires confirmation. Confirm the exact revision, regional order code, configuration and current supply before ordering.
Before you request a quote
Include the full model, manufacturer P/N, revision and quantity.
Tell us the host model, generation, installed configuration and required supporting hardware.
Specify condition, testing requirements, destination and requested delivery date.
Workstation
P/NSYS-5038A-I
Workstation
P/NSYS-5039A-I
Workstation
P/NSYS-5038A-IL
Workstation
P/NSYS-5039AD-I
