Loading products and specifications…
WorkstationBuild around your workload
Supermicro SYS-7039A-I workstation, manufacturer order code SYS-7039A-I. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
Tell us the configuration, quantity and destination. Your quotation will show availability, condition, warranty and delivery terms.
Start an order requestSupermicro / PRODUCT DETAILS
See what is installed, then compare it with the platform limits. The maximum supported configuration may be different from what ships with this unit.
KEY SPECIFICATIONS / 01
Confirm drive carriers, backplane, controller and any required cables.
Supermicro / ORDER & INSTALLATION DETAILS
Identify the complete system SKU and board revision.
Check the supported chassis, backplane and riser combination.
Include required cables, cooling parts and drive carriers in the order.
Technical overview
Use the full part number when comparing options or asking about system fit.
| Manufacturer model | SYS-7039A-I |
|---|---|
| Ordering P/N | SYS-7039A-I |
| Product type | Manufacturer system order code; listed processor, memory, storage, expansion, networking, cooling and power details describe platform capabilities or limits unless the source explicitly states installed components |
| Manufacturer category | Workstation System |
| Motherboard | Super X11DAi-N |
| Processor/Cache — CPU | Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s Support CPU TDP 70-205W * |
| Cores | Up to 28 Cores |
| Processor/Cache — Note 1 | * 200W/205W CPUs are supported under certain configurations. Special Low Tcase CPU SKUs are not supported. Please contact Supermicro Technical Support for additional information and specialized system optimization. |
| Processor/Cache — Note 2 | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) |
| Processor/Cache — Note 3 | Must add Heatsink SNK-P0070APS4 when purchasing complete system from Supermicro. |
| Memory Capacity | 16 DIMM slots Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM |
| Memory Type | 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
| DIMM Sizes | RDIMM: 64GB LRDIMM: 64GB 3DS LRDIMM: 128GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| System Memory — Note | DIMM capacities larger than 32GB are supported under certain configurations. Please contact Supermicro Technical Support for additional information and specialized system optimization. |
| Chipset | Intel® C621 chipset |
| On-Board Devices — SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| Network Controllers | Dual LAN with GbE from C621 |
| IPMI | ASPEED AST2500 |
| On-Board Devices — Audio | RealTek ALC888 7.1 High Definition Audio with S/PDIF header |
| Input / Output — SATA | 10 SATA3 (6Gbps) ports |
| NVMe | 2 NVMe support with optional cables |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports |
| USB | 6 USB 3.0 ports (4 rear, 2 front) 2 USB 3.1 ports (rear) |
| Input / Output — Audio | 7.1 HD Audio with optical S/PDIF |
| Video | 1 VGA port |
| Serial Port / Header | 1 COM port (header) |
| DOM | 2 SuperDOM (Disk on Module) ports |
| TPM | 1 TPM 2.0 Header |
| BIOS Type | UEFI 128M |
| Management software listed for this platform | Intel® Node Manager IPMI 2.0 SSM , SPM , SUM SuperDoctor® 5 Watchdog |
| PC Health Monitoring — CPU | Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator |
| FAN | Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for fan connectors |
| Form Factor | Mid-Tower |
| Model | CSE-732D3-1K26B |
| Height | 16.7" (424mm) |
| Width | 7.6" (193mm) |
| Depth | 20.68" (525.3mm) |
| Gross Weight | 40 lbs (18.1 kg) |
| Available Colors | Black |
| Buttons | Power On/Off button |
| LEDs | Power LED Hard drive activity LED Network activity LED System Information LED |
| Ports | 2 front USB 3.0 Ports 2 front HD/AC97 Audio Ports |
| PCI-Express | 4 PCI-E 3.0 x16 slots 2 PCI-E 3.0 x8 slots |
| M.2 | M.2 Interface: PCI-E 3.0 x4 Form Factor: 2260, 2280, 22110 Key: M-Key |
| Internal | 4 Fixed 3.5" drive bays (90° rotatable drive cage) Enterprise SATA HDD only recommended |
| Peripheral Bay | 2x 5.25" standard drive bays 4x 2.5" fixed drive bays (optional) |
| Fans | 1x 12cm rear exhaust fan 1x 12cm front cooling fan Optimized cooling technology for Whisper-Quiet Operation |
| Power Supply | 1200W PS2 Multi-output Power Supply |
| Power Efficiency | 94% |
| Total Output Power and Input | 1000W with Input 100 - 120Vac 1200W with Input 120 - 240Vac |
| AC Input Frequency | 50-60 Hz |
| Dimensions (L x W x H) | 185 x 150 x 86 mm |
| Output Type | 24pin ATX |
| -12V | Max: 0.3A / Min: 0A |
| +12V | Max: 83A (100Vac - 120Vac) Max: 99A (120Vac - 240Vac) |
| +5V | Max: 20A / Min: 0A |
| +3.3V | Max: 20A / Min: 0A |
| +5Vsb | Max: 3A / Min: 0A |
| Certification | Platinum Certified |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
HOW THIS PRODUCT FITS YOUR SYSTEM
Choose how you plan to use this product.
Match the processor generation, socket population and required heatsink.
Check the installed modules, supported type and population rules.
Use this checklist to describe the change. The host system and full configuration determine which parts will fit.
YOUR QUOTE REQUEST
Add the quantity, options and installation details you want us to quote.
Confirm the exact manufacturer part number, host compatibility and included components. Optional software is quoted separately only when requested.
SUPPORT & REPLACEMENT
Check support dates, replacement options and whether continued use still makes sense.
We do not have confirmed sales and support dates for this part number.
Send us the full SYS-7039A-I order code, software release and support details before planning long-term use.
Ask us to check the current sales and support statusProducts with similar names or connectors may still be incompatible. Compare the full specifications, installed system and software requirements.
Compare related products These products may be related, but we have not confirmed them as replacements.USING HARDWARE RESPONSIBLY
Consider repairability, remaining support and actual operating demand. Extending service life is useful only when the equipment still meets your security and reliability requirements.
Use measured average input power for the same workload. PSU ratings and processor TDP are different from total system power.
Energy difference = (current W − proposed W) × hours × units ÷ 1,000. Excludes cooling, embodied emissions and purchase costs.CONNECTION DETAILS
Choose the host adapters around the workload and the storage protocol. A server NIC, Fibre Channel HBA and SAS HBA serve different connections.
Browse the categories above for related equipment, then send us the full configuration so we can check the fit.
PRODUCT DETAILS
Supermicro SYS-7039A-I workstation, manufacturer order code SYS-7039A-I. Review the documented processor, memory, storage, expansion, networking, cooling and power requirements for this exact system SKU.
The listed processor, memory, storage, expansion, networking, cooling and power values are manufacturer platform capabilities or limits. Optional and supported components are not installed unless the exact source row explicitly states inclusion.
Software and operating systems shown are platform listings; licenses and subscriptions are not assumed to be included. The saved manufacturer Product SKUs section identifies this order code as Discontinued SKU (EOL). Confirm the exact revision, regional order code, configuration and current supply before ordering.
Before you request a quote
Include the full model, manufacturer P/N, revision and quantity.
Tell us the host model, generation, installed configuration and required supporting hardware.
Specify condition, testing requirements, destination and requested delivery date.
Workstation
P/NSYS-5039A-IL
Workstation
P/NSYS-5038A-I
Workstation
P/NSYS-5039A-I
Workstation
P/NSYS-5038A-IL
